The Coil On Plug (COP) Quick Ignition tester is a battery- Operated, Hand- Held quick tester designed to easily and quickly determine if a COP is producing a proper spark for the plug.
The quick tester works by receiving a signal from the secondary ignition coil. Once the signal is received, The tester determines
if the COP is producing the correct amount of voltage and the duration of the arc. If the voltage is correct, The tester beeps and
the red LED light flashes; And if the duration of the arc is correct, The green LED will also flash
3.Test Results
Red LED Light Consistent, Steady flashing and beeping indicates the COP is producing the correct amount of voltage.
No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage. This may be caused by one of the following:
Fouled spark plug, Or incorrect gap Damaged/ Corroded wires or connectors Faulty coil or PCM Green LED light Consistent and steady flashing indicates the duration of the arc is correct.
4.Note
No response or an inconsistent response indicates the duration of the arc is NOT correct. This may be caused by one of the
following
1. Shorted windings inside the coil 2. Resistance or bad connections in the 3. Primary / Secondary connections 4. Faulty coil
Benz Star | Volvo VIDA DiCE | vas 5054A | Sbb key programmer | OBD2 code scanner | MB star c3 | Lexia-3
Copyright(C)2010 www.autokcan.com All right reserved.
Email:info@autokcan.com MSN:autokcan@live.cn Skype:autokcan