Panel Illustration: 1.Indicator 2.Water content 3.Work button(PUSH ON button) 4.Fine tuning 5. temperature-resisting curve 6. DC input socket 7. Probe
Applications:
How To Use 1. After cleaning the probe, put it in dry air or immerse it into new brake fluid.
2.Press down the work button for 3-5 seconds continously, and then turn the fine tuning clockwise until the second green indicator lights on, and then turn the fine tuning counter-clockwisely until the green indicator put out. Now it can be used to test brake fluid.
3.Immerse the probe into the brake fluid, and press down the work button for a few seconds, then you can judge the brake fluid state by indicator light.
*All the green light indicate the brake fluid is fine, the water content is below 0.5%
*Yellow light indicates the fluid is not so good, the water content is above 0.5%, you can choose to change brake fluid.
*Red light with buzzer sound indicates the brake fluid is very bad, wate content above 2.5%, the brake force decline seriously, and brake fluid should be changed!
4.Please clean the probe and reset the instrument after testing.
★Warning: The four indicators twinkle simultaneously with buzzer sound, it means the battery power is low, and the battery need to be changed.(voltage:9v). Or powered by the automotive battery(12v) through DC input socket(12v)
Benz Star | Volvo VIDA DiCE | vas 5054A | Sbb key programmer | OBD2 code scanner | MB star c3 | Lexia-3
Copyright(C)2010 www.autokcan.com All right reserved.
Email:info@autokcan.com MSN:autokcan@live.cn Skype:autokcan